关于半鞅向量随机积分的两个结果

首先利用半鞅Girsanov定理与闭图像定理证明了:若{Xn}是带滤基的完备概率空间(Ω,F,F,P)中的一列半鞅,其中滤基F=(Ft)t≥0满足通常条件,且{Xn}在关于P的Emery拓扑空间中收敛于X,则当概率测度Q相似文献   

一种基于LVQ的语音线谱对参数量化方法

在现有格型矢量量化(LVQ)方法的基础上,通过对线谱对(LSP)参数进行精度预处理,使其数值更接近于格点从而减少量化失真。仿真实现了改进方法,并采用MELP算法中4级MSVQ方法作为对比。得到的结果表明,较之MSVQ,LVQ量化LSP参数的精度提升了约90%的同时,合成语音的谱失真(SD)降低了约2/3,客观评估得分和近似MOS分略有提高。     

地面防空目标优化分配问题研究

在多年来从事指挥自动化系统研究的基础上,对地面防空目标分配中的若干问题进行了研究。其中包括多目标通道地空导弹武器系统杀伤区的确定,各火力单位相对于飞机类、导弹类目标的射击诸元计算,目标优化分配模型的建立及其求解。     

H2O2/HTPB固液混合发动机点火试验研究

利用H2O2催化分解原理,设计了烃类燃料在催化分解的90%H2O2中能燃烧的点火器,然后采用该点火器进行H2O2/HTPB固液混合发动机点火试验研究.试验结果表明,该点火器能够成功启动H2O2/HTPB固液混合发动机,且当混合比偏离最佳混合比后,发动机的燃烧效率降低.     

高超声速飞行器边界层外缘参数仿真分析

以高超声速飞行器为研究对象,构建快速准确计算高超声速飞行器无黏边界层外缘参数的计算方法。拟合空气比热、比热比随温度变化曲线,建立空气属性温度划分准则。基于不同空气属性建立高超声速飞行器边界层外缘参数工程与数值计算模型,采用钝双锥模型,对比分析工程估算、无黏数值及有黏数值计算方法的计算结果。结果表明,0°攻角状态下,基于无黏流场的数值计算与工程估算和有黏数值计算的压强最大差值分别为1.19%和2.39%;10°攻角状态下,最大差值分别为5%和50%;从而证明所提出的无黏数值计算方法明显优于工程计算方法,为进一步快速准确计算高超声速飞行器气动热环境奠定了重要基础。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

Optimal maintenance policies for a safety‐critical system and its deteriorating sensor

We consider the integrated problem of optimally maintaining an imperfect, deteriorating sensor and the safety‐critical system it monitors. The sensor's costless observations of the binary state of the system become less informative over time. A costly full inspection may be conducted to perfectly discern the state of the system, after which the system is replaced if it is in the out‐of‐control state. In addition, a full inspection provides the opportunity to replace the sensor. We formulate the problem of adaptively scheduling full inspections and sensor replacements using a partially observable Markov decision process (POMDP) model. The objective is to minimize the total expected discounted costs associated with system operation, full inspection, system replacement, and sensor replacement. We show that the optimal policy has a threshold structure and demonstrate the value of coordinating system and sensor maintenance via numerical examples. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 399–417, 2017     

周期运动声源的双阵列定位

针对常用的运动声源定位方法存在计算量较大或测试难度大的问题,提出一种基于阵列信号短时处理的运动声源定位方法。分析单、双五元十字阵列的定位性能,并基于单阵列的高精度定向能力,借鉴波束形成中帧处理思想,使用双阵列方位交叉的方法实现声源运动定位。使用自行火炮的发动机周期噪声作为模拟声源,进行外场定位实验,对参与短时相关数据的截取原则和传播路径补偿进行研究。实验结果表明,该方法能够有效实现周期声源的运动定位,最大相对误差保持在5%的水平。     

装备保障指挥Agent框架建模

针对装备保障指挥难以用高度程式化的数学模型进行描述的问题,构建了一种装备保障指挥Agent框架模型。介绍了Agent建模方法,分析了装备保障指挥的指挥流程,并根据装备保障指挥流程和Agent的建模特点抽象出装备保障指挥Agent框架结构,对其中的各Agent内部模块进行设计,并对各Agent之间的通信模式进行了研究,设计的结构模型可为其他同类研究提供参考。     

弹丸弹托结构参数对挤进阻力的影响研究

为了研究某滑膛武器弹丸弹托的不同结构参数及摩擦系数对挤进阻力的影响,分别以弹丸弹托的不同结构参数及摩擦系数作为单一变量,利用Ansys-workbench有限元软件分别对其挤进过程进行数值模拟仿真,得到挤进阻力的变化,进而分析该结构参数对挤进阻力的影响,从而为该滑膛武器弹丸结构设计提供了重要依据,也为同类武器的弹托设计提供了一定的参考价值。